[Jewelry making - Article 00123] - Re: [Orchid] Soldering tube settings together

[Kaytzbdz]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Helen,

    Solderite soldering boards are available from Rio Grande, Otto/Frei,
    Contenti, Progress Tools, etc. in the US. They are white, sort of
    chalky, very light weight, stiff in stature, but soft in that you
    can saw, dent, carve and sand easily. Cynthia Eid recommended them
    for use while soldering Argentium and Ben Neubauer in Portland,
    Oregon (USA) was the one that suggested the sawing/carving, etc. in a
    workshop, to cut/glue to act as sort of archtectural jigs to hold
    wire while soldering. The only negative is that they are a little
    pricey. Google "Solderite Soldering Boards". I may have led you
    astray with "Solderite pads." I googled "Solderite Soldering Boards
    UK" and couldn't find at the first juncture. What came up was a type
    of circuit board for soldering electrical components. That's not it.

Kay
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________