[Jewelry making - Article 00120] - Re: [Orchid] Precision scroll saw

[Dave Arens]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Gang,

    I've successfully used the Proxxon model DS 115/E scroll saw with
    jeweler's saw blades for piercing. The nice thing about this saw is
    that there is an adjustment in the head that will allow the use of
    shorter (read broken or worn) blades. 

    The saw sells in the US for around $147.00. 

Dave
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________