[Jewelry making - Article 00001] - Re: [Orchid] Broken drill bits remover

[Norman Buck]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     Does anyone know of a source for this type of thing for smaller
>     sized drills? 

    You will find screw extractors at Industrial supply sites like
    use-enco.com and mscdirect.com. These typically go down to Screw size
    5-6 or M3. Other option is left hand carbide drill bits. Many times
    drilling out a bit or screw will loosen/unscrew it. 

Norman
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________