[Jewelry making - Article 01178] - Re: [Orchid] How to Tighten Princess Cut Diamonds?

[jericcoleman]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    This is about tightening Princess Diamonds? Boys and Girls don't try
    this at work! Yes I use me hammer hand piece on the flaps very
    carefully and also will pinch the corners with needle nose. I also
    use stone setting pliers to pull the metal on top of the stone.A lot
    of princess solitares are set poorly. Having several stores to do
    repair work,I tighten stones every day. 

Time is Money!
Johneric
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________