[Jewelry making - Article 01133] - Re: [Orchid] [Source] Super Prices for Flex shaft

[Terry Ogden]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Moe

    I know I'm going to get a foredom and a low cost one.. 

    http://tinyurl.com/2hragl 
    and 
    http://www.ottofrei.com/store/product.php?productid=16864 

    are the two least expensive from a national supplier, found these on
    a google search of "Flexshaft and "Jewelers tools". You did not say
    which one you were looking for. Did find some that were cheaper, but
    the motors were only good to 5000 rpm. Also, make sure the motor is
    complete, they do sell motors alone without shafts, controllers or
    hand pieces, so it is worth the call before ordering. 

    Ran across a 2230 kit at a pawnshop once and got it for $68,
    needless to say I bought it even though I did not need one at the
    time. Might try the pawns in your local area just in case there is
    one hidden somewhere. 

Terry
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________