[Jewelry making - Article 00465] - Re: [Orchid] Solders for brass

[Barbara Bowling]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I've used brazing rod, which you can buy anywhere that sells brazing
    supplies. (got mine at NORCO). You need to make sure that the melting
    point of the rod is less than that of your brass. I use a lot of
    NuGold (which, according to my reference, has a melting point of
    1886F...pretty high.) 

    Torch on... 

Barb
Barbara Louise Bowling
www.LouisesLeap.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________