[Jewelry making - Article 00933] - Re: [Orchid] Laser welding silver

[Grayson Carroll]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Using the Argentium laser works great on these thicker shanks.
    280-300 volts, 4.0 ms, beam  AT 12 to add wire. I am not a fan of the
    sharpie, but if I absolutely need to use, blue is my preference.
    Scuffing the surface with sanding disc or emery paper works best for
    me. Also, keep an eye on the seam, if the metal looks spongy, lower
    your setting. 

Hope this helps.

S. Grayson Carroll II
Laser Sales/Trainer
stuller.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________