[Jewelry making - Article 00913] - Re: [Orchid] Vibrating flexhaft handpiece

[Karen Goeller]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Holly,

    Have you tried taking off the handpiece and re-seating it? (You
    should do that with the flexshaft turning, by the way - very
    counter-intuitive) It could be as simple as the handpiece not being
    fully seated and connecting correctly with the shaft. 

    Karen Christians has an excellent book on the Flex Shaft which will
    take you through operations and maintenance tasks that might help you
    trouble-shoot the problem. It's available from the Ganoksin website
    and I really recommend it. 

    http://www.ganoksin.com/item--Orchid-in-Print-Vol-1--flexshaftbook 

Hope this helps!
Karen Goeller
No Limitations Designs
Hand-made, one-of-a-kind jewelry
www.nolimitations.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________