[Jewelry making - Article 00793] - Re: [Orchid] Disappearing diamonds fired in PMC

[Al Balmer]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     There seems to be a bit of a mix up here. When I read the post
>     which suggested trying diamond powder, I assumed that the person
>     meant heating the diamond powder on its own but under the same
>     conditions as one would heat the original PMC, just to see whether
>     or not there was any diamond matter left at the end of it. 

    You are exactly right. The question is the effect on the diamond,
    not the clay. 

Al Balmer
Sun City, AZ
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________