[Jewelry making - Article 00675] - Re: [Orchid] Laser welding silver

[james newton]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I too struggle with heavier sterling. Often the stress cracks are
    visible partway through the welding process. When you see the crack
    first appear you know the battle is lost. Marking pen, Argon,
    Argentium, step down pulsing, all are some help (it is possible to
    use silver solder, but that defeats the purpose of welding), but I
    still am looking for the right "magic". I have gone back to the torch
    for all heavier shank sizings, and use the laser only to fill pits of
    these rings. If any one has solved this sterling/laserdilemma, I'd
    really like to know!
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________