[Jewelry making - Article 00613] - Re: [Orchid] Customer is going to test my limits

[Dave Mereski]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Leslie

    It sounds to me, based on your description, that you should look
    into having someone do this up using CAD. With the layering of the
    components, CAD is perfect for creating separate pieces that can be
    cast in the different colors, and then assembled like pieces in a
    puzzle. There are companies out there that, if you send them a basic
    sketch, will design the piece on CAD, and send you back a computer
    rendered image of what the piece will look like when it is done. Most
    will even carve the wax model for you as well. From there, it is
    cast, assemble and set. 

Good Luck

Dave Mereski
www.thegoldworks.net
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________