[Jewelry making - Article 00565] - [Orchid] Customer is going to test my limits

[Leslie]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I have a customer that is going to test my limits. He wishes to have
    a yellow gold (thick in depth and size) go from knuckle to bottom of
    finger in a size 13. Then he wants a rose gold cross coming out of
    the yellow gold. Then he wants an infinity sign going around the
    cross (not just laid on top but actually coming from underneath) and
    then he wants a one carat diamond in the center of the cross) Now by
    my calcualtions with the infinity sign going around the cross would
    that not cross in the center of the cross? I have not been able to
    draw it any other way. Therefore where should the diamond go? And
    what on earth have I gotten myself into? Any help you can give me
    (even to tell me it is a job for a master gunner) please send my way.

Thanks Leslie
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________