[Jewelry making - Article 00296] - Re: [Orchid] Rubber Mold Storage

[Jwryrubber]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Richard:

    I'd like to clear up one point. I can't speak for all other
    silicones, but our 4X and RTV-RP silicone molds won't stick to
    plastic surfaces of any kind. I don't know about Polyurethane RTVs,
    which many people think are silicone. I don't know if they will
    stick. Polyurethane tends to revert over time, so maybe there is a
    problem with long term storage in plastic drawers. 

    If anybody has a mold that sticks to anything, just dust it a bit
    with talc. 

Regards,
Bill
Zero-D Products, Inc.
precision engineered materials solutions
http://www.zerodproducts.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________