[Jewelry making - Article 00294] - Re: [Orchid] Mold making on the cheap

[Jwryrubber]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi William:

    There are two ways to make a mold that does not shrink. 

    You can achieve zero shrink by using our Akron RTV-RP clear
    silicone. 

    You can also use our 4X ZeroShrink, which just won an MJSA
    innovation award for 2007. 

    The 4X ZeroShrink is cured from 160F through 250F--your
    choice--depending on the model. 

    Keep in mind that only the mold does not shrink. Your wax and other
    steps do produce shrink. 

    Contact me off forum for details and samples 

Regards,

Bill Mull
Zero-D Products, Inc.
precision engineered materials solutions
http://www.zerodproducts.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________