[Jewelry making - Article 00106] - Re: [Orchid] Debubblizing RTV mould compound

[Mark Parkinson]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     I mix RTV I use a plastic sandwich bag...push out the air and seal
>     the bag... squish bag to mix.. set it in bowl to vacumn...does not
>     expand much... not much air...cut a corner out of the bag push the
>     stuff out into the mold frame...when done throw the bag away no
>     messy cleaning. 

    Thanks Bill, that was such a great trick to share. I had used the
    RTV only when forced to because it was such a sticky mess to clean
    up. I felt that I was wasting a ton of time with the clean up. Great
    idea! 

Mark
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________