[Jewelry making - Article 00021] - Re: [Orchid] Debubblizing RTV mould compound

[gustavo hoefs]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    twic - we used a clear rtv from akron rubber did some experimentation
    (of course) found that being frugal and carefull with the hardener
    was to our advantage. we only vaccumed the compound once after that
    we would set the mold frame up next to a desk lamp and the heat from
    the bulb was just right, the bubbles would all rise to the top and
    the stuf would harden up perfect every time some of you may scoff at
    this account but i can assure all that it is true

best regards goo
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________