[Jewelry making - Article 01144] - Re: [Orchid] Measuring ring shank with jeweler's scale

[SusanThornton]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    If the desired size is 5 you add 3x the thickness of the stock you
    are using to fabricate the ring then that is the length you cut the
    stock. 

    That has always worked for me. 

Susan
http://web.mac.com/SusanThornton
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________