[Jewelry making - Article 01060] - Re: [Orchid] Experience with Jewel Jet Steamer

[r dufault]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Bought one a year or so ago to test out.It is really NOT meant to be
    left on. It's more like using an Iron...Plug it in wait 5-10 min. us
    it... un-plug. It blows the gasket and other stuff goes bad quickly
    with constant use. Hand operation is not good for brac,.necklaces
    etc.Try looking at the Optima Jr. about $150.00 pressure gauge, low
    water auto-off,and a foot peddle!!! Two months and so far so
    good. Beware letting customers use it at your store--- BURN HAZARD
    ---and that could get very expensive!
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________