[Jewelry making - Article 01048] - Re: [Orchid] Rolling Mill Basics - The Square

[Jeff Demand]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Lisa,

    Boat supply places cater to an exclusive market and charge
    accordingly, probably worse than jewellery tool places. 

    Harbourfreight.com # 30905 looks like mine for $20. A decent chain
    hardware store could order one, my local True Value has a stack of
    catalogues over a foot high. They will order even stuff they didn't
    know existed provided that I can prove that it does. 

    Pictures of my bench at 

    http://www.ganoksin.com/ftp/drawBench.jpg
    http://www.ganoksin.com/ftp/DBstored.jpg 

    Regular fir 2x4s, the 'ears' are oak screwed and glued. In hindsight
    I should have imbedded a small rare earth magnet in each to hold
    steel draw plates. Someday. 

    Any questions, just ask. 

Jeff
Demand Designs
Analog/Digital Modelling & Goldsmithing
http://www.gmavt.net/~jdemand
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________