[Jewelry making - Article 01025] - [Orchid] High pressure water jets cutting

[frank thomson]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi All

    Has anyone an idea if there is a small laser or water jet cutter
    available on the market. 

    i have lots of 316 stainless discs about 12 inches dia (300mm) 2-3
    +4mm thickand want to cut figurines etc out of them. small 3 inch
    maximum? diameter? animals birds fairies etc What can anyone suggest. 


    I can scribe engrave etc detail on them- polishing them afterwards
    is no problem 

thanks in advance
Frank Thomson
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________