[Jewelry making - Article 00895] - Re: [Orchid] Arbor press for tube rivets?

[james newton]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Depending on size and shape, I use an old watchmaker's staking tool
    to do rivets. The set included many different stakes and punches,
    that the jig holds in alignment for both riveting and removing pins
    and rivets when needed. A very simple well made tool specifically
    designed for this type of work.
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________