[Jewelry making - Article 00888] - Re: [Orchid] Experience with PUK welders

[Gary]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I agree that drilling would work, but the customer wasn't keen. The
    following links show a better example: a pendant bail fitted to a
    pretty shell. The bail is made of 0.8mm silver wire threaded through
    the natural holes in the shell and welded closed. Soldering the bail
    would have certainly destroyed the shell. 

    http://tinyurl.com/36jeng is the front of the pendant
    http://tinyurl.com/3cqjvm shows the rear

Regards, Gary Wooding
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________