[Jewelry making - Article 00878] - Re: [Orchid] Rolling Mill Basics - The Square

[Helen Hill]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Thanks John,

    I'll have to bite the bullet and put the mill to good use. I got the
    impression that the draw bench is more of a luxury that you can get
    by without but it seems as though having some basic draw plates for
    use with the bench vice would be a good idea, to get consistent wire
    with uniform strength. I'll get to know the mill first I think and
    then assess what I need thereafter. You can never have enough tools!

Helen
UK
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________