[Jewelry making - Article 00835] - Re: [Orchid] Non-Tapered Sqaure File

[frank goss]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    David, thanks for the info. I have been dealing with Gesswein for
    years and never knew they had a tool and die catalog. I'm on the
    phone. And just for those who are interested in non-tapered files a
    round one is available at your local Hardware store (got mine at
    Sears) just ask for a file to sharpen a chain saw. They are straight
    and round and about 4 mm in diameter. 

Frank Goss
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________