[Jewelry making - Article 00831] - Re: [Orchid] Experience with PUK welders

[Mlou Brubaker]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     I did it pretty easily with my PUK2, the following links show the
>     complete bracelet and a closeup of the lugs.
>     http://tinyurl.com/2docux 
>     http://tinyurl.com/yukqem 

    Nice job, Gary! Some enterprising jeweler could also have completed
    it by riveting the eye in to the bracelet. There is plenty of metal
    thickness there for drilling, IMHO. 

M'lou
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________