[Jewelry making - Article 00818] - Re: [Orchid] New Fly Press

[Tim Blades]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Ali,

    take a sack truck and some planks, does your car have a lip on the
    boot? you may have trouble getting it out. Also you will need a 
sturdy
    bench, and bear in mind it will make quite a thump when you use it,
    could annoy the neighbours, a concrete floor will not transfer so
    much sound, 

regards Tim.( who has done this!)
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________