[Jewelry making - Article 00793] - Re: [Orchid] Experience with PUK welders

[Gary]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I was asked to fit a safety chain to a silver bracelet that
    contained a large piece of amber. The customer had already contacted
    some other jewellers and had been told that it was impossible to
    attach the required lugs without damaging the amber. I did it pretty
    easily with my PUK2, the following links show the complete bracelet
    and a closeup of the lugs. 

    http://tinyurl.com/2docux 
    http://tinyurl.com/yukqem 

Regards, Gary Wooding
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________