The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Milling your own or buying stock  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: bill wismar
Date: Tue Oct 16 05:34:00 2007
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I can make most any size stock with my rolling mill as can most good
    jewelers and I enjoy it when I do. BUT, I cannot justify spending my
    time making my own stock in my daily routine. I looked at an invoice
    today and it cost about $2.50 cents a pennyweight surcharge over
    gold cost to buy stock. Then add the alloy cost and the time to roll
    the stock it just doesn't pay. Not to mention you can order exactly
    what you want when you need it. If you need 8" of 2 x 2 thats what
    you order if you are making your own you will most always be over.
    That cost money. I personally do not think many of the big jewelry
    houses make their own, just take a tour of stuller or hoover or PM or
    any of the other guys and see what they are producing everyday.
    Someone is buying it and it aint the little guy thats buying the huge
    rolls of wire that I saw being produced. I may get a lot of flack
    over this but I do not think most of us can alloy and roll stock near
    as nice as the professionals. Totally controlled environments and the
    best technology give us, the end user perfect stock almost everytime.
    That my dear friends is what I use to make fine jewelry, not
    remelted gold that I used for casting just yesterday or maybe old
    gold I bought off the street. Think about the gold inventory that you
    have to have on hand to make what you might need. Call me a lazy
    slacker if you choose but never call me late to open my fed ex box of
    straight and shiny bar stock. With that said, of course I roll down
    existing stock to smaller sizes when I need to, I don't buy
    everysize I need. 

Happy Rolling everyone
Bill Wismar
www.metalbendersgallery.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project