[Jewelry making - Article 00382] - Re: [Orchid] Square Rings Sizes

[Ted Callier]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     I have had numerous requests for this information. Please look for
>     the latest version (version 1.1) on the web at 

    Paul, can you please explain to us how you arrived at the corner
    radius numbers given in your sheet. What is your reasoning, and why
    did you chose exactly these corner radius, and not any other possible
    radius ? Also: You vary this number with the ring size, wouldn't it
    be much more reasonable to adjust with material thickness ? 

Thanks,
Ted
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________