[Jewelry making - Article 00354] - Re: [Orchid] CAD/CAM grown model woes

[Les Brown]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Richard,

>     So, in the future, make molds of the grown models? There was no
>     saving of time or money using CAD/CAM. Just a new problem. How you
>     those who use grown models deal with this? 

    The material used in SolidScape rapid prototyping systems burns out
    like any ordinary wax. No special procedures or kiln killing high
    temps required. When you go shopping for a service bureau ask what
    machines they're using. 

Les Brown
www.goldwork.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________