[Jewelry making - Article 00275] - Re: [Orchid] Comparing gemstone setting techniques

[Melissa Veres]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Pam,

    I'm a bit late on this request, and I do endorse both the Jett-Set
    and leather as viable options for avoiding marks when using the pins
    on the top of the engraving block. Another trick, which is easier
    than Jett-Set and works better than leather (which can be a bit
    bulky on small items), is to use strips of drafting tape to wrap
    around the object. I take a length of tape, and cut it into several
    narrow strips, then wrap around the perimeter. It will give a bit,
    too, so you can get a smooth fit over uneven surfaces. You can add a
    piece to the back as well to prevent scratches, Use only a couple of
    layers, and be sure the work just snug, not overly tightened in the
    block. 

Have fun!
Melissa Veres, engraver
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________