[Jewelry making - Article 00043] - Re: [Orchid] Using Bonnie Doon Saw Guide

[Cynthia Eid]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Hi, the problem is that thinner saw blades make stronger dies, but
    are more difficult to use without breaking them. So, when you are
    learning, use heavier saw blades, and the appropriate slant, as given
    in Susan Kingsley's book, and the instructions. As with all sawing,
    slow and steady wins the race. 

Cynthia Eid
http://www.cynthiaeid.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________