[Jewelry making - Article 01421] - [Orchid] Rhodium plating safe thickness

[Jonathan Silo]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    On another note - I wish to Rhodium plate my white gold pieces,
    which came out somewhat discolored after soldering. Is there a
    specific thickness of the Rhodium level that I need to ask my Plater
    to achieve in order for the Rhodium to not come off (ever)? My
    jewelry is very expensive, and I am terrified of the damage
    something like this could do to my name... 

    Thanks so much in advance, 

Jonathan
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________