[Jewelry making - Article 00365] - Re: [Orchid] Comparing flex shafts

[Mark Parkinson]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    For many years we only used Foredom flex shafts and motors. But we
    really prefer Ottoflex for an all purpose flex shaft. With the Lucas
    pedal it runs really smooth and best of all it has a super duper
    soft & very flexible sheath, much more flexible than Foredom (which
    isn't bad if you go that way). Any time one of the Foredoms breaks
    down and is beyond repair (which doesn't happen very often) we
    replace it with an Ottoflex. 

    http://tinyurl.com/hroaa 

Mark
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________