[Jewelry making - Article 00236] - [Orchid] HF micro die grinder

[David J McIntyre]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi, All.

    I see that the Harbor Freight 1/8" Micro Die Grinder is on sale once
    again; item 47869-4VGA  AT  $9.99. True it's not the finest high speed
    grinder in the world, but it works. They claim 56,000 rpm  AT  90 psi
    air pressure. At speeds like that a little carbide bur gives you
    incredible control with no sense of pressure. Of course you need to
    use only cutting tools that are designed for the high rpms. 

    I still have brass bushings to fit both 1/16 and 3/32 burs in it's
    collet, FREE to any of you who wish to get the grinder and commit to
    making a contribution to ORCHID (perhaps the best site on the WWW). 

Just let me know and I'll send them to you!
Dr. Mac
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________