[Jewelry making - Article 01643] - Re: [Orchid] Checkering File

[silvermason]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Hi Rebecca. I use one frequently to put a "coin edge" on bracelets.
    You have to really control the file so you're moving in a straight
    line along the length of the file. I'll make one pass, then move the
    file over about half the width of the file and make another pass,
    etc. With each pass, make sure the file is seated in the grooves from
    the previous pass, to give an uninterupted pattern. 

    True checkering, though, comes from making a second series of passes
    over the same piece, but from a different angle. This creates a
    pattern of diamonds, such as is frequently found on gunstocks and
    grips. 

Have fun! 
Allan Mason
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________