[Jewelry making - Article 01629] - Re: [Orchid] Speckled patina on brass

[Wayne Emery]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Noel,

    There are many ways to achieve the speckled or mottled patinas. One
    way is to use sawdust (think coarse, medium or fine) which has been
    dampened with the appropriate solution (not soaked). The sawdust is
    placed along with the piece in a sealed container (Zip lock will
    work) and NOT MOVED for a few minutes or hours or overnight.
    Experimentation is in order, room temperature plays a part. 

    Some creative thinking about the materials which come in contact with
    your metal piece can lead down lots of fun roads, not all explored
    thoroughly. 

Have fun!
Wayne Emery
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________