[Jewelry making - Article 01518] - Re: [Orchid] Making trial rings

[R . E . Rourke]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Hoover and Strong Tigold alloy..looks and acts like gold,lasts
    without tarnish in sample cases for years,and is quite
    inexpensive..there is not another readily available alloy that
    performs as well. some master alloys can be used but not without
    problems as the strength that the plumb metal lends to the alloy is
    missing..So for all around good general yellow gold trials..Tigold is
    the anwer..a note - use a bit less of the "additive B" than they
    recommend unless you are after an antique gold colour.. 

R.E.Rourke
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________