[Jewelry making - Article 01235] - Re: [Orchid] Understanding casting shrinkage

[Todd Hawkinson]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Dear Bill,

    I always leave something out. A mask is an absolute must. Everyone
    in my casting classes get one. Mine is fit and tested while I am
    wearing it by an OSHA certified technician. My technique about the
    proper quenching process comes right from the Ultravest folks at
    Ransom & Randolf. Their technical staff is always willing to help. 

    Here is another tip from my experience. Ultravest is the best
    investment for both vacuum and spin casting. Satin Cast doesn't spin
    cast as well. They made it new and improved a few years ago and it
    doesn't breathe as well. 

Best Regards,
Todd

 
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________