The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Attaching endcaps to rubber cord  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Bericho
Date: Tue Aug 21 04:19:44 2007
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Janet:

    I have used rubber cord a fair amount this past year (I love the
    contemporary look it gives) and I've been very successful using Rio
    JetSet Adhesive (p 519 in the 2007 catalog). I've used primarily 2mm
    or 4mm cord. On occasion I've made my own end caps when I either
    couldn't find what I wanted or needed it NOW - a true PITA - but
    certainly doable. 

    To test the adhesive, I took a piece of scrap rubber cord, adhered
    the cord into a scrap piece of tubing with the adhesive (didn't push
    the cord all the way in, though enough for holding purposes - left a
    bit of space at the top of the tube so I could get hold of it with
    pliers)and allowed it to set over-night (although being a super glue
    it dries quickly). I then secured the rubber cord in a vise and with
    pliers grabbed the open tubing end and gave it a pretty strong pull
    (more than you'd get from fastening or wearing the item. It held to
    my satisfaction. That being said, I've usually had tubing that fit
    the rubber cording pretty close. You could check with Rio about how
    close the fit needs to be. 

    I like the fact that the Rio JetSet does not get brittle. 

    But then this is my personal experience, and I think each person
    needs to do their own test to see. 

    I've been wearing a choker length necklace I made for myself (4 mm
    rubber cord w/a pendant) for quite a while now and there is no
    visible sign of the bond weakening. And I wear this piece frequently.
    I used one of the twist clasps to fasten this one. So it gets twisted
    all the time when putting it on or taking it off. 

Kay

 
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project