[Jewelry making - Article 01175] - [Orchid] Attaching endcaps to rubber cord

[JanetB]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Orchidians,

    I need to attach sterling silver cylindrical endcaps to 5mm dia.
    silicon rubber cord (for choker). The cord fits in with a bit of
    play, so I am concerned about making a secure connection between the
    rubber and the silver. If I insert the cord, drill thru cord and cap
    together, and rivet, will it weaken the rubber too much at the point
    of the hole? What size drill? Is rubber firm enough to keep the
    silver cap from squashing during the riveting process? Should I also
    use glue before inserting the rubber to drill? What kind of glue? I
    would be grateful for advice, particularly from Orchidians who are
    used to making these kind of chokers. 

Many thanks,
Janet

 
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________