[Jewelry making - Article 00706] - Re: [Orchid] Article: Minimal Metalsmithing

[fishbre396]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Many metal clay pieces cannot be repaired, especially those with
    stones embedded in them. If it's a matter of soldering something back
    on, although that's not always an easy thing to do, it can sometimes
    be done without damaging the rest of the piece. 

    Don't all cuff bracelets break eventually? I've found that metal
    clay cuffs break within a year. 

 
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________