[Jewelry making - Article 00171] - Re: [Orchid] Electric Wax Pens

[Rick Hamilton]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I re-organized my studio a couple of months ago, and freed up a
    bench for wax work. I had collected three wax pens, so I plugged them
    into an power strip and plugged that into an off/on foot switch. I
    turn on the power switch to the wax pen that I want to use, and
    select the temperature setting, and use the foot switch to turn it
    off and on, giving me additional control over the wax melting
    temperature while I am working. I have different tips on each wax
    pen, I just turn on the one I need. I used to have just one pen on
    the foot switch, this was easier than trying to remember the location
    of three foot controls.... 

Rick Hamilton
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________