[Jewelry making - Article 00167] - Re: [Orchid] Soldering with diamonds in place

[coralnut]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    There is just one thing about soldering with certain stones in
    place. While it is alright, in fact, recommended that one cover a
    diamond with flux....never cover a corundum (sapphire or ruby). The
    flux will burn into the stones' surface and ruin it. 

    Cheers from Don at The Charles Belle Studio in SOFL where simple
    elegance IS fine jewelry!
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________