[Jewelry making - Article 00127] - Re: [Orchid] Adorama Photography Lighting system

[Joel Schwalb]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I believe that we discussed this subject a couple of years ago and
    there is info in the archives. For those of you interested in an
    inexpensive version of the "Cloud Dome", try a local plastics
    supplier or manufacturer. I was able to buy a translucent white
    acrylic dome from my local plastics supplier for $10. I cut a hole
    in the top to accomodate my camera lens. I printed out a gradient
    sheet, put it on a table top and then placed a piece of non-glare
    glass on top of two 12" lengths of 2"X4" lumber. The dome sits on top
    of the glass. I use two light sources. This is a cheap and simple way
    to duplicate the basic dome type photo system. I would be happy to
    email a couple of photos of this system. Contact me off line. Joel 

Joel Schwalb
www.schwalbstudio.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________