[Jewelry making - Article 01724] - Re: [Orchid] Working with rainbow obsidian

[Larry]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    If you could be creative and build a wall of material (SS) around
    the stone so that the top of the stone was lower than the wall of
    metal, you might get away with using this stone. 

    If the stone would not be protected, it would not look good is a
    short period of time. The surface of the stone would continually
    need repolishing. 

Larry E. Whittington
http://www.jewelrycabs.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________