[Jewelry making - Article 01549] - Re: [Orchid] To quench or not to quench, that is the question

[Judy Willingham]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I agree with James Binnion. 

>     I apply the prips first then with the work still hot place a small
>     amount of the paste flux at the joint.

    Although in my case, I use Battern's liquid flux and with an insulin
    syringe, place a tiny drop on the joint. When the flux goes clear, I
    put the solder on the joint. Works for me. 

    Judy in Kansas, who is heading for cooler temps in the mountains
    soon.
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________