[Jewelry making - Article 01543] - Re: [Orchid] Polishing after setting stones

[Neilthejeweler]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     Am I supposed to polish the rings before I give them to the setter? 

    depends on the arrangement you have with the shop. Expect an
    additional charge for polishing, although polishing tool marks in the
    area of the stones should be included in the setting charge. 

>     How can I polish the rings once the stones are set? I'm afraid I
>     will ruin the opal if I use tripoli or rouge. 

    you shouldn't really have a problem as long as you don't let the opal
    get hot, and HOLD ONTO that ring! Neither rouge nor regular tripoli
    will abrade the stones. You should be careful cleaning off the
    residue though. Its usual practice to completely finish a piece
    before setting, then touch up afterwards.
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________