[Jewelry making - Article 01235] - Re: [Orchid] Ideas on Lifting Tables for Booth Display

[Wildpoppy2]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     What would be a good solution? Having one section that is lower? 

    That might be a good idea, however i know how limited your space is
    at shows, and how important table space is when setting up,
    especially indoors, when you don't have much choice, and your table
    set up has to be a solid front set up. longest run on sentence i've
    done in a while. 

    i didn't mean to cause anyone guilt with my comments, i was just
    feeling frustrated cause more and more are going to the elevated
    table. i did see one regular table, that was set up with shelves, so
    it was half regular, and then went up for the rest of the goodies. it
    was secured to the table, didn't go all the way across, only about
    half, and it looked distinctive.. 

pat
http://imageevent.com/patmcaudel
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________