The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] 18k Alloys  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: rebecca rourke
Date: Fri Jul 20 05:09:32 2007
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Annette

    I'm not certain what you want to know. . it sounds like you want to
    add silver and not more gold, and not more copper to your master
    alloy and fine gold. If you tell me what colour you want I can give
    you the formula. I make karated gold in 29 colours/hues, and don't
    recommend some of them for anything less than 18, while a few are
    for 14kt-to maintain their ductile malleable properties without
    compromise or unnecessary problems in rolling it out, or in refining
    and remelting scrap to add to it. If you want to buy it, then Hoover
    and strong and Kitco have some richer less orang-y colours. . you
    might go for the green, blue green range, depending on the stones
    and the 14kt you are planning on using. There isn't a pat answer
    without knowing whose 14 kt. yellow you have, and if you are capable
    and willing to make it (pour to roll) yourself. Also if you add 14 to
    18, it is then no longer 18 karat. And you are right, you should not
    sell or mark it as such. but with a bit more info i can give you more
    in depth answers. Again more silver 3Dless red and orange tonesMore
    copper less yellow gold adding anything other than 24 kt., in
    direct relative proportion to the other materials you need to achieve
    your colour and maintain your karat can't be done as you were
    imagining. To keep the gold at 18 there is a specific formula
    /equation for the creation of 750 golds, which are half a karat purer
    than American gold. (any British or Imperial Karat Gold is always 1/2
    kt. purer than American standards). So If you have a colour you want
    email me with more descriptors and I may be able to give you a simple
    formula that will coordinate with what you are planning to use or
    purchase, or stones, etc.

RER
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Blogs
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2009, The Ganoksin Project